SN74CBT3253CDBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3253 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Throw Configuration | SP4T |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3253CDBR Overview
For the purpose of saving board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74CBT series can be used for a wide range of applications.Among its basic features are 16 terminations.In addition, it also has a base part number of 74CBT3253, which can be used to find related parts.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer contains 8 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, there is a power supply provided at 5V.The turn signal switch operates with 2 outputs.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.TR is used to package the switches.12Ohm is the resistance at which it operates.When 3μA is delivered to the load, stability of the multiplexers can be maintained.
SN74CBT3253CDBR Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT3253CDBR Applications
There are a lot of Texas Instruments SN74CBT3253CDBR Signal Switches / Multiplexers / Decoders applications.
- Relay
- Used to connect a single source to multiple destinations
- Combinational circuit
- Electronically controlled engine system
- Control unit of Central Processing unit (CPU)
- Image transmission
- Frequency multiplexing system
- Make full adder
- Electronic circuits
- PCIe
