Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Multiplexer/Demultiplexer |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74CBT3253 |
Pin Count |
16 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Operating Supply Current |
3μA |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
6.2 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6.2 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3253CPW Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74CBT series multiplexers.Among its basic features are 16 terminations.In addition, it also has a base part number of 74CBT3253, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 16 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 8 bits available.Keeping Vsup at 4V will prevent some unwanted failures.There is a power supply provided for the mux switch's normal operation of 5V.As part of the operation of this turn signal switch, there are 4 outputs.The part belongs to the Other Logic ICs category of signal switches.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.With a resistance of 12Ohm, it operates.Transmission is carried out over 2 channels in the turn signal switch's circuit.When a voltage supply of 3μA is delivered to the load, stability of the multiplexers can be maintained.
SN74CBT3253CPW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT3253CPW Applications
There are a lot of Texas Instruments SN74CBT3253CPW Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Data collection system
- Arithmetic Logic Units
- Communication system
- Data-routing applications
- Memory system of computers
- Data bus control
- Video transmission
- Idle motor
- Speed control of medern motors