Parameters |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1mm |
Length |
4mm |
Width |
3.5mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Number of Pins |
16 |
Weight |
37.194574mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
Type |
Multiplexer/Demultiplexer |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBT3253 |
Pin Count |
16 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Operating Supply Current |
3μA |
Number of Bits |
8 |
Throw Configuration |
SP4T |
Propagation Delay |
6.2 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6.2 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
SN74CBT3253CRGYR Overview
Due to the fact that it is provided in the 16-VFQFN Exposed Pad, digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74CBT series multiplexers.Its basic configuration includes terminations in the 16 range.The base part number is 74CBT3253, which is also useful when looking up signal switch's related components.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 16 component pins.In this case, the supply type is Single.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer provides 8 bits.Vsup should be kept at 4V to prevent some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The turn signal switch has 2 outputs designed for operation.The digital switch ic is a part of an electronic system classified as Other Logic ICs.It consumes 3μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 12Ohm.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 3μA.
SN74CBT3253CRGYR Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
Operating with the supply current of 3μA
SN74CBT3253CRGYR Applications
There are a lot of Texas Instruments SN74CBT3253CRGYR Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Metal detectors
- Code conversion
- Arithmetic Logic Units
- Data bus control
- Data demultiplexing
- VGA
- CNC machines
- Robotic vehicles
- Analog to digital conversion