Parameters |
Resistance |
10Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
TTL COMPATIBLE MUX/DMUX SWITCH |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT3253 |
Pin Count |
16 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
7.9 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
74.502547mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
SN74CBT3253DBQRG4 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The base part number is 74CBT3253, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.This turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.With 16 pins, it is configured.Surface Mount is the way it is mounted.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 8 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.The turn signal switch has 4 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 10Ohm is used to operate the signal switching.A total of 2 channels are used for transmission in the turn signal switch's circuit.Also, it provides an improved version of the characteristics of TTL COMPATIBLE MUX/DMUX SWITCH.
SN74CBT3253DBQRG4 Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
SN74CBT3253DBQRG4 Applications
There are a lot of Texas Instruments SN74CBT3253DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- A/D converters
- To select different task for memory in microprocessor memory systems
- D/A converters
- HD surveillance system
- Medium scale TV wall
- Speed control of medern motors
- Microprocessor input/output systems
- Arithmetic Logic Units
- Audio transmission