SN74CBT3253DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 15Ohm |
| Additional Feature | TTL COMPATIBLE MUX/DMUX SWITCH |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Operating Supply Current | 3μA |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Throw Configuration | SP4T |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 7.9 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3253DBR Overview
In order to save board space, digital switch is located in the 16-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer/Demultiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.The part number for 74CBT3253 can be used to find its logic switch related parts as well.The multiplexer's system works with 5V voltage.A component pin count of 16 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer provides 8 bits.Keep Vsup at 4V to avoid unnecessary failures.mux switch's normal operation requires the power supply of 5V.As a result, the turn signal switch consists of 4 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.The resistance of the signal switching is 15Ohm.For transmission, there are 2 channels in the turn signal switch's circuit.In addition, it provides improved characteristics compared to TTL COMPATIBLE MUX/DMUX SWITCH.When the load is supplied with a voltage of 3μA, stability of the multiplexers can be maintained.
SN74CBT3253DBR Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
Operating with the supply current of 3μA
SN74CBT3253DBR Applications
There are a lot of Texas Instruments SN74CBT3253DBR Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- PCIe
- Idle motor
- Robotic vehicles
- Implementing boolean functions with multiple variables
- Telephone network
- Logic circuits
- GLAN
- D/A converters
- Solenoid cooling fan
