Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
TTL COMPATIBLE MUX/DMUX SWITCH |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
16 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4V |
Operating Supply Current |
3μA |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
7.9 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Logic IC Type |
MULTIPLEXER AND DEMUX/DECODER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74CBT3253DG4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.Rail/Tube is the packaging method.It is designed with 16 terminations as part of its basic configuration.In multiplexer's system, 5V is the voltage supplied.Signal switch has 16 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer contains 8 bits.For mux switch's normal operation, power supply 5V is provided.In order for the turn signal switch to work, there are 4 outputs.In electronic terms, the digital switch ic is classified as Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 7Ohm.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.The maximum temperature for this signal switch is 85°C.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at the maximum supply voltage of 5.5V in accordance with its applicable specification.Typical device specifications specify a voltage supply of 4V for the digital swith.In addition, TTL COMPATIBLE MUX/DMUX SWITCH provides improved characteristics.IC MULTIPLEXER AND DEMUX/DECODER is used for the logic of this chip.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 3μA.
SN74CBT3253DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 3μA
SN74CBT3253DG4 Applications
There are a lot of Texas Instruments SN74CBT3253DG4 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Encrypted communications system
- Microprocessor instruction decoding
- Data demultiplexing
- Idle motor
- Computer memory
- Automatic Monitoring systems
- VGA
- To select different task for memory in microprocessor memory systems
- Used to connect a single source to multiple destinations