Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer/Demultiplexer |
Resistance |
10Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
TTL COMPATIBLE MUX/DMUX SWITCH |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3253 |
Pin Count |
16 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Circuit |
2 x 4:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
7.9 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3253PWRG4 Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 74CBT3253, which can be used to find related parts.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer consists of 8 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).The power supply of 5V is provided for mux switch's normal operation.This turn signal switch has 4 outputs designed for its operation.This is an the digital switch ic that is classified as Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 10Ohm.The turn signal switch's circuit consists of 2 transmission channels.In addition, it provides improved characteristics compared to TTL COMPATIBLE MUX/DMUX SWITCH.
SN74CBT3253PWRG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
SN74CBT3253PWRG4 Applications
There are a lot of Texas Instruments SN74CBT3253PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Make half adder
- Data demultiplexing
- Seven segment displays
- Automatic health monitoring systems
- Small scale TV wall
- Steel plants
- VGA
- Automation system
- Idle motor