Parameters |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Pin Count |
16 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4V |
Operating Supply Current |
3μA |
Number of Bits |
4 |
Propagation Delay |
6.5 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6.5 ns |
Family |
CBT/FST/QS/5C/B |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
8 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Logic IC Type |
MULTIPLEXER AND DEMUX/DECODER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Length |
9.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
Resistance |
12Ohm |
SN74CBT3257CDG4 Overview
Digital switch is provided in the SOIC for the purpose of saving board space.Rail/Tube is the packaging method.The basic configuration includes 16 terminations.For multiplexer's system, 5V voltage is supplied.This turn signal switch has 16 component pins.A conductor terminates at GULL WING.This supply type employs Single.With 16 pins, it is configured.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 4 bits.The power supply of 5V is provided for mux switch's normal operation.As a result, the turn signal switch consists of 2 outputs.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.It consumes 3μA current of multiplexer ic since it is not affected by external factors.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.It has 8 inputs.This signal switching operates at a resistance of 12Ohm.85°C is an acceptable maximum temperature for this signal switch.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.A minimum supply voltage of 4V is specified for the digital swith in accordance with its applicable specifications.It uses the logic IC MULTIPLEXER AND DEMUX/DECODER as its core logic unit.Load stability of the multiplexers can be maintained by delivering 3μA supply voltage.
SN74CBT3257CDG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 3μA
SN74CBT3257CDG4 Applications
There are a lot of Texas Instruments SN74CBT3257CDG4 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Automatic health monitoring systems
- Metal detectors
- Idle motor
- Telephone network
- Electronics industry
- Code converters
- Microprocessor memory systems
- Used to connect a single source to multiple destinations
- A robotic vehicle with the metal detector