SN74CBT3257CDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3257CDRG4 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration includes 16 terminations.You can also find related parts by using its logic switch base part number of 74CBT3257.The multiplexer is supplied with 5V voltage.This turn signal switch contains 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 4 bits in signal multiplexer.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).There is a power supply provided for the mux switch's normal operation of 5V.There are 2 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as Other Logic ICs.Not being affected by the external factors, consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 8 inputs.The switches package is packaged in accordance with TR.8Ohm is the resistance at which it operates.
SN74CBT3257CDRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3257CDRG4 Applications
There are a lot of Texas Instruments SN74CBT3257CDRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- PCIe
- Medical industry
- Analog to digital conversion
- Small scale TV wall
- Data bus control
- Automatic Monitoring systems
- Frequency multiplexing system
- High-performance memory systems
- CNC machines
