SN74CBT3257PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE MUX/DMUX SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.7 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3257PWG4 Overview
Due to the lack of space on the board, digital switch is provided in the TSSOP.The package is packaged in accordance with Rail/Tube.Among its basic configurations are 16 terminations.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.This multiplexer ic is configured with 16 pins.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 8 bits.For mux switch's normal operation, power supply 5V is provided.As a result, the turn signal switch consists of 2 outputs.The digital switch ic is a part of an electronic system classified as Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.It operates with a resistance of 15Ohm.A total of 4 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.The minimal operating temperature of the multiplexer should be maintained at -40°C.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4V.Also, it provides an improved version of the characteristics of TTL COMPATIBLE MUX/DMUX SWITCH.It employs MULTIPLEXER AND DEMUX/DECODER as its logic IC.Providing the load with a supply voltage of 3μA can maintain stability of the multiplexers.
SN74CBT3257PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 3μA
SN74CBT3257PWG4 Applications
There are a lot of Texas Instruments SN74CBT3257PWG4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- HD surveillance system
- Night vision cameras
- Communication system
- Decimal decoder
- High-performance memory systems
- Data bus control
- Electronic circuits
- Automation system
- Signal router
