SN74CBT3305CDGKR
| Parameters | |
|---|---|
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT3305 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
SN74CBT3305CDGKR Overview
In order to conserve board space, digital switch is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The package is packaged in the manner of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.Among its basic configurations are 8 terminations.There is a base part number 74CBT3305 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.A component pin count of 8 is found on this turn signal switch.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.Currently, it is configured with a 8 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 1 bits available.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.mux switch's normal operation requires the power supply of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.With a resistance of 0, it operates.The system operates with a resistance of 12Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT3305CDGKR Features
Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT3305CDGKR Applications
There are a lot of Texas Instruments SN74CBT3305CDGKR Signal Switches / Multiplexers / Decoders applications.
- CNC machines
- Home automation system
- Enabling different functions units in microprocessor instruction decoding
- Used to connect a single source to multiple destinations
- Night vision cameras
- Paper plants
- Electronics industry
- Small scale TV wall
- Frequency multiplexing system
- Analog, digital or video signal switching
