Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBT3306 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
2 |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
2 |
Propagation Delay |
4.6 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
150 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Address Bus Width |
2b |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.05mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3306CD Overview
It is included in the 8-SOIC (0.154, 3.90mm Width) in order to save board space.The package is packaged in accordance with Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 8 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of 74CBT3306.The voltage supplied for multiplexer's system is 5V.multiplexer's systemSignal switch has 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.This multiplexer ic has 8 pins configured.The mount is in Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 2 bits.Keeping Vsup at 4V will prevent some unwanted failures.During mux switch's normal operation, 5V is provided with a power supply.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 12Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT3306CD Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3306CD Applications
There are a lot of Texas Instruments SN74CBT3306CD Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Transmission from the computer system of a satellite
- Enabling different rows of memory depending on address in memory chips
- Solenoid cooling fan
- Logic circuits
- Injectors
- Home automation system
- Implementing boolean functions with multiple variables
- CNC machines
- Automation system