SN74CBT3306DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3306DE4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Rail/Tube.The basic configuration of this system includes 8 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 8 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.A configuration of 8 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 1 bits.In order for 5V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 2.This signal switching operates at a resistance of 7Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.The maximum operating temperature of 85°C is acceptable for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.Typical device specifications specify a voltage supply of 4V for the digital swith.Also, it provides an improved version of the characteristics of BUS SWITCH.In order to implement its logic, it makes use of IC BUS DRIVER.
SN74CBT3306DE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
BUS DRIVER as the logic IC
SN74CBT3306DE4 Applications
There are a lot of Texas Instruments SN74CBT3306DE4 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- RF-based home automation system
- Medical industry
- Transmission from the computer system of a satellite
- Memory system of computers
- Microprocessor memory systems
- Microprocessor input/output systems
- Telephone network
- Time division multiplexing system
- Night vision cameras
