SN74CBT3306PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height | 1.15mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3306PWG4 Overview
In order to save board space, digital switch is located in the TSSOP.This configuration includes 8 terminations as part of its basic functionality.The multiplexer's system is powered by 5V volts.This turn signal switch has 8 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.It is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 1 bits in signal multiplexer.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 7Ohm.A total of 2 transmission channels are available in the turn signal switch's circuit.The signal switch can operate at a maximum temperature of 85°C.Ideally, the temperature of the multiplexer should not exceed -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.5V in compliance with the applicable device specification.The digital swith is specified to operate at the minimum supply voltage of 4V in compliance with the applicable device specification.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CBT3306PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3306PWG4 Applications
There are a lot of Texas Instruments SN74CBT3306PWG4 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Logic circuits
- CNC machines
- Steel plants
- Idle motor
- A/D converters
- VGA
- To select different task for memory in microprocessor memory systems
- Data-routing applications
- Enabling block of memory depending on address in memory chips
