SN74CBT3306PWR

8 Terminations4.5V~5.5V 8 Pin 74CBT3306 Signal switch74CBT Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3306PWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 138
Description: 8 Terminations4.5V~5.5V 8 Pin 74CBT3306 Signal switch74CBT Series 2 Functions(Kg)

Details

Tags

Parameters
Type	Bus Switch
Resistance	7Ohm
Subcategory	Bus Driver/Transceiver
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBT3306
Pin Count	8
Output Voltage	2V
Operating Supply Voltage	5V
Circuit	1 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Channels	2
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64A
Number of Bits	1
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	3μA
Turn On Delay Time	5.6 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Nominal Input Voltage	2V
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.003mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Drain to Source Resistance	7Ohm
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99

SN74CBT3306PWR Overview

Digital switch is provided in the 8-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CBT series can be used in a wide range of applications.There are 8 terminations included in its basic configuration.Its logic switch base part number is 74CBT3306 which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 8 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 8 pins.This unit is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.It consumes 3μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A TR packaging method is used in the switches.A resistance of 2 governs its operation.It operates with a resistance of 7Ohm.The turn signal switch's circuit consists of 2 transmission channels.For greater switches' flexibility, 64A provides the output current.