Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
8 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBT3345 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
5.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.05mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3345CDW Overview
Providing this information in the 20-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.It is packaged according to the Tube method.Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 20 terminations.In addition, it also has a base part number of 74CBT3345, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 20 component pins.Conductors terminate at GULL WING in this design.Single is used as its supply type.A configuration of 20 pins is used.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 8 bits available.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is a category for the digital switch ics.Without external influences, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.This signal switching operates at a resistance of 12Ohm.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3345CDW Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345CDW Applications
There are a lot of Texas Instruments SN74CBT3345CDW Signal Switches / Multiplexers / Decoders applications.
- Night vision cameras
- GLAN
- Decimal decoder
- Used to connect a single source to multiple destinations
- Metal detectors
- To select different devices in microprocessor input
- Automatic health monitoring systems
- Enabling block of memory depending on address in memory chips
- VGA
- Robotic vehicles