Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
SMD/SMT |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3345 |
Pin Count |
20 |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
5.8 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
5.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.05mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3345CPW Overview
For the purpose of saving board space, digital switch is included in the 20-TSSOP (0.173, 4.40mm Width).Tube is the packaging method.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers in the 74CBT series are suitable for a wide range of applications.Among its basic features are 20 terminations.The base part number is 74CBT3345, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 20 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.There are 20 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.There are 8 bits signal multiplexer provides.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.During mux switch's normal operation, 5V is provided with a power supply.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.As far as the resistance is concerned, it operates with 2.12Ohm is the resistance at which it operates.64mA provides a high degree of switches' flexibility.
SN74CBT3345CPW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345CPW Applications
There are a lot of Texas Instruments SN74CBT3345CPW Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Used to connect a single source to multiple destinations
- Small scale TV wall
- Encrypted communications system
- Logic gates for other digital devices
- Data collection system
- Home automation system
- Computer memory
- Memory chips
- Frequency multiplexing system