SN74CBT3345CPWR

20 Terminations4.5V~5.5V 20 Pin 74CBT3345 Signal switch74CBT Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBT3345CPWR
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 408
Description: 20 Terminations4.5V~5.5V 20 Pin 74CBT3345 Signal switch74CBT Series 1 Functions(Kg)

Details

Tags

Parameters
Number of Pins	20
Weight	76.997305mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Bus Switch
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBT3345
Pin Count	20
Operating Supply Voltage	5V
Circuit	8 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Nominal Supply Current	3μA
Output Current	64mA
Number of Bits	8
Throw Configuration	SPST
Propagation Delay	150 ps
Quiescent Current	3μA
Turn On Delay Time	5.8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.05mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	6.5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)

SN74CBT3345CPWR Overview

In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sWith the 74CBT series, the multiplexers are suitable for a diverse range of applications.It is designed with 20 terminations as part of its basic configuration.There is a base part number of 74CBT3345 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 20 component pins.GULL WING represents the end of conductors.This supply type employs Single.The board has 20 pins configured.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 8 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 3μA current of multiplexer ic since it is not affected by external factors.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches is packaged according to the way of TR.The system operates with a resistance of 2.A resistance of 12Ohm is used to operate it.Higher switches' flexibility is provided by providing 64mA as the output current.