SN74CBT3345CRGYR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3345CRGYR Overview
Due to the lack of space on the board, digital switch is provided in the 20-VFQFN Exposed Pad.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.It is designed with 20 terminations as part of its basic configuration.In addition, it also has a base part number of 74CBT3345, which can be used to find related parts.The multiplexer is supplied with 5V voltage.Signal switch has 20 component pins.In this case, the supply type is Single.Currently, it is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer provides 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order for 5V to operate normally, a power supply is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The system operates with a resistance of 2.The resistance of the signal switching is 12Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT3345CRGYR Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345CRGYR Applications
There are a lot of Texas Instruments SN74CBT3345CRGYR Signal Switches / Multiplexers / Decoders applications.
- Signal router
- To select different task for memory in microprocessor memory systems
- Frequency multiplexing system
- Data transfer
- Analog to digital conversion
- High-performance memory-decoding applications
- Data demultiplexing
- Home automation system
- Medical industry
- High-performance memory systems
