SN74CBT3345CRGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3345CRGYRG4 Overview
Due to the fact that it is provided in the 20-VFQFN Exposed Pad, digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74CBT series are suitable for a wide range of applications.Among its basic configurations are 20 terminations.The part number for 74CBT3345 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.A component pin count of 20 can be found on this turn signal switch.There is a type of supply Single that is employed in this case.With 20 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.A power supply is provided for mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 12Ohm.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3345CRGYRG4 Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345CRGYRG4 Applications
There are a lot of Texas Instruments SN74CBT3345CRGYRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Combinational circuit
- Electronics industry
- To select different task for memory in microprocessor memory systems
- Frequency multiplexing system
- Used to connect a single source to multiple destinations
- A/D converters
- To select different devices in microprocessor input
- Code converters
- Electronic circuits
