SN74CBT3345DBR
| Parameters | |
|---|---|
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 9.1 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74CBT3345DBR Overview
In order to conserve board space, digital switch is included in the 20-SSOP (0.209, 5.30mm Width).The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.The basic configuration includes 20 terminations.You can also find related parts by using its logic switch base part number of 74CBT3345.The multiplexer's system is powered by 5V volts.Signal switch has 20 component pins.As a result, GULL WING represents the end of the conductors.Single is employed as its supply type.With 20 pins, it is configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 8 bits.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 50μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 is the resistance at which it operates.The system operates with a resistance of 7Ohm.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT3345DBR Features
Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345DBR Applications
There are a lot of Texas Instruments SN74CBT3345DBR Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Automatic health monitoring systems
- Audio transmission
- Image transmission
- Data distribution
- Implementing boolean functions with multiple variables
- Seven segment displays
- Control unit of Central Processing unit (CPU)
- Recording transmission
- Logic circuits
