SN74CBT3345DBRE4
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 9.1 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN74CBT3345DBRE4 Overview
Providing this information in the 20-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.Among its basic features are 20 terminations.To find signal switch's related components, a base part number of 74CBT3345 may also be used.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 20 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.The board has 20 pins configured.The mounting is in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 8 bits in signal multiplexer.In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 50μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The resistance of the signal switching is 2.With a resistance of 7Ohm, it operates.For greater switches' flexibility, 64mA provides the output current.
SN74CBT3345DBRE4 Features
Supplied in the 20-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345DBRE4 Applications
There are a lot of Texas Instruments SN74CBT3345DBRE4 Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Night vision cameras
- Microprocessor instruction decoding
- To select different devices in microprocessor output
- Communication system
- Decimal decoder
- Enabling different functions units in microprocessor instruction decoding
- Frequency multiplexing system
- Robotic vehicles
- Memory chips
