SN74CBT3345DGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT3345 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3345DGVR Overview
It is included in the 20-TFSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.As a member of 74CBT series, the multiplexers can be used for a wide range of applications.It is designed with 20 terminations as part of its basic configuration.There is a base part number 74CBT3345 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 20 components that can be connected to each pin.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.A total of 20 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 8 bits available.In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches packaging is based on TR.The resistance of the signal switching is 2.This signal switching operates at a resistance of 7Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBT3345DGVR Features
Supplied in the 20-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3345DGVR Applications
There are a lot of Texas Instruments SN74CBT3345DGVR Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Electronically controlled engine system
- Signal router
- Code converters
- Telephone network
- Data-routing applications
- Microprocessor input/output systems
- Enabling different rows of memory depending on address in memory chips
- Data transfer
- Transmission from the computer system of a satellite
