Parameters |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
2mm |
Length |
8.2mm |
Width |
5.3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Number of Pins |
24 |
Weight |
172.39345mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus FET Exchange Switch |
Resistance |
8Ohm |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
5 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3383 |
Pin Count |
24 |
Circuit |
5 x 2:2 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
4 |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
DPDT |
Propagation Delay |
150 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
SN74CBT3383CDBR Overview
It is included in the 24-SSOP (0.209, 5.30mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74CBT series are suitable for a wide range of applications.Its basic configuration includes terminations in the 24 range.In addition, it also has a base part number of 74CBT3383, which can be used to find related parts.The multiplexer is supplied with 5V voltage.This turn signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.Single is used as its supply type.A total of 24 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The power supply of 5V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Other Logic ICs.The resistance of the signal switching is 4.The system operates with a resistance of 8Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBT3383CDBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT3383CDBR Applications
There are a lot of Texas Instruments SN74CBT3383CDBR Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Data demultiplexing
- Data transfer
- Data collection system
- Communication system
- Memory system of computers
- To select different devices in microprocessor output
- Decimal decoder
- A robotic vehicle with the metal detector
- Control unit of Central Processing unit (CPU)