SN74CBT3383CDBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus FET Exchange Switch |
| Resistance | 8Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 5 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3383 |
| Pin Count | 24 |
| Circuit | 5 x 2:2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3383CDBRE4 Overview
Due to the fact that it is provided in the 24-SSOP (0.209, 5.30mm Width), digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.Its basic configuration includes terminations in the 24 range.As its base part number is 74CBT3383, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 24 component pins.Conductors terminate at GULL WING in this design.There is a type of supply of Single.A total of 24 pins are configured on this board.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.With a resistance of 0, it operates.It operates with a resistance of 8Ohm.64mA provides a high degree of switches' flexibility.
SN74CBT3383CDBRE4 Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT3383CDBRE4 Applications
There are a lot of Texas Instruments SN74CBT3383CDBRE4 Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Data collection system
- Electronically controlled engine system
- Logic gates for other digital devices
- VGA
- Microprocessor input/output systems
- High-performance memory-decoding applications
- Home automation system
- Data demultiplexing
- Decimal decoder
