SN74CBT3383CDBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 170.01209mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus FET Exchange Switch |
| Resistance | 8Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 5 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3383 |
| Pin Count | 24 |
| Circuit | 5 x 2:2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3383CDBRG4 Overview
Due to the fact that it is provided in the 24-SSOP (0.209, 5.30mm Width), digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus FET Exchange Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Several applications are possible for 74CBT series multiplexers.Its basic configuration includes terminations in the 24 range.Its logic switch base part number is 74CBT3383 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 24 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.The board has 24 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 10 bits signal multiplexer provides.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.Keeping Vsup at 5.5V will prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.This is an the digital switch ic that is classified as Other Logic ICs.The resistance is 4.The system operates with a resistance of 8Ohm.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT3383CDBRG4 Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74CBT3383CDBRG4 Applications
There are a lot of Texas Instruments SN74CBT3383CDBRG4 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Combinational circuit
- High-performance memory-decoding applications
- High-performance memory systems
- Memory chips
- Transmission from the computer system of a satellite
- Idle motor
- HDMI applications
- Seven segment displays
- Robotic vehicles
