SN74CBT3383CDGVR
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT3383 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 2:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 2 |
| Throw Configuration | DPDT |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.3 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus FET Exchange Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
SN74CBT3383CDGVR Overview
Providing this information in the 24-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in accordance with Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Bus FET Exchange Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.It is designed with 24 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBT3383 may also be used.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has 24 component pins.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 24 pin configuration.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer contains 2 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.A power supply is provided for mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Other Logic ICs.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.In this multiplexer, there is a total of 10 inputs.The resistance of the signal switching is 4.A resistance of 8Ohm is used to operate it.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBT3383CDGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3383CDGVR Applications
There are a lot of Texas Instruments SN74CBT3383CDGVR Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- HD surveillance system
- Data-routing applications
- Medical industry
- Electronics industry
- Home automation system
- Analog, digital or video signal switching
- A/D converters
- Data bus control
- HDMI applications
