SN74CBT3383CDWR
| Parameters | |
|---|---|
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 2:2 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 4 |
| Number of Bits | 10 |
| Throw Configuration | DPDT |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus FET Exchange Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT3383 |
SN74CBT3383CDWR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses an analog IC Bus FET Exchange Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT3383.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 24 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.There are 24 pins on it.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits provided.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.The power supply of 5V is provided for mux switch's normal operation.This is a signal switch that is categorized as Other Logic ICs.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.According to TR, the switches is packaged.As far as the resistance is concerned, it operates with 4.With a resistance of 8Ohm, it operates.
SN74CBT3383CDWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3383CDWR Applications
There are a lot of Texas Instruments SN74CBT3383CDWR Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Code converters
- Memory chips
- Analog, digital or video signal switching
- Automation system
- A robotic vehicle with the metal detector
- Recording transmission
- Seven segment displays
- Microprocessor instruction decoding
- Computer memory
