SN74CBT3383DGVR
| Parameters | |
|---|---|
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus FET Exchange Switch |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 5 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT3383 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 2:2 |
| Power Supplies | 5V |
| Number of Ports | 4 |
| Output Current | 64mA |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 9.2 ns |
SN74CBT3383DGVR Overview
This is a relatively small item of digital switch that is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.Bus FET Exchange Switch is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 24 terminations.The base part number is 74CBT3383, which is also useful when looking up signal switch's related components.For multiplexer's system, 5V voltage is supplied.There are 24 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.There are 24 pins on it.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 2 bits provided.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 10 outputs.The digital switch ic is an electronic part classified into Other Logic ICs.Without any external influences, it consumes 50μA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The signal switching operates with a resistance of 4.With a resistance of 10Ohm, it operates.In addition, TTL COMPATIBLE BUS SWITCH exhibits improved characteristics.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT3383DGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
SN74CBT3383DGVR Applications
There are a lot of Texas Instruments SN74CBT3383DGVR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- CNC machines
- Frequency multiplexing system
- Data distribution
- RF-based home automation system
- Solenoid cooling fan
- Make half adder
- Code converters
- Decimal decoder
- Control unit of Central Processing unit (CPU)
