SN74CBT3384ADBQRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3384ADBQRG4 Overview
Due to the fact that it is provided in the SSOP, digital switch allows the board to be compacted.There is a design for terminating 24 as part of its basic configuration.In this case, 5V is the voltage supplied to the multiplexer's system.There are 24 component pins in this turn signal switch.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.There are 24 pins on it.It is positioned in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides a total of 10 bits.During mux switch's normal operation, 5V is provided with a power supply.This is a signal switch that is categorized as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The signal switching operates with a resistance of 2.In terms of resistance, it has a value of 7Ohm.The signal switch can operate at a maximum temperature of 85°C.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.5V.Typical device specifications specify a voltage supply of 4V for the digital swith.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CBT3384ADBQRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3384ADBQRG4 Applications
There are a lot of Texas Instruments SN74CBT3384ADBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- To select different task for memory in microprocessor memory systems
- Steel plants
- GLAN
- Analog, digital or video signal switching
- Seven segment displays
- Data transfer
- Medium scale TV wall
- Automation system
- Speed synchronization of multiple motors in industries
