SN74CBT3384ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3384ADBR Overview
In order to save board space, digital switch is located in the 24-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers from 74CBT series can be used for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.To find signal switch's related components, a base part number of 74CBT3384 may also be used.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 24 components that can be connected to each pin.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 10 bits signal multiplexer provides.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.According to TR, the switches is packaged.The resistance of the signal switching is 2.A resistance of 7Ohm is used to operate the signal switching.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT3384ADBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3384ADBR Applications
There are a lot of Texas Instruments SN74CBT3384ADBR Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Make half adder
- Electronically controlled engine system
- CNC machines
- Image transmission
- Logic gates for other digital devices
- Medical industry
- Code converters
- Automatic Monitoring systems
- Data transfer
