SN74CBT3384ADWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 350 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height | 2.35mm |
| Length | 15.4mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3384ADWG4 Overview
As a means of saving space, digital switch is provided in the SOIC.As part of its basic configuration, 24 terminations are designed as a part of it.The turn signal switch is supplied with a voltage of 5V volts.Signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.The board is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 10 bits.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.2 ports are used for some other peripheral signal switchings to plug in.With a resistance of 7Ohm, it operates.In this case, operating this signal switch at 85°C is acceptable.A temperature of the multiplexer of -40°C should be maintained for minimal operation.It is specified that the signal switches should operate at 5.5V as its maximum supply voltage.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4V.In addition, TTL COMPATIBLE BUS SWITCH provides improved characteristics.It uses IC BUS DRIVER for its logic.
SN74CBT3384ADWG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
SN74CBT3384ADWG4 Applications
There are a lot of Texas Instruments SN74CBT3384ADWG4 Signal Switches / Multiplexers / Decoders applications.
- Signal router
- HD surveillance system
- Time division multiplexing system
- Electronic circuits
- Make full adder
- GLAN
- Night vision cameras
- Video transmission
- Analog to digital conversion
- Microprocessor input/output systems
