SN74CBT3384APWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3384APWRE4 Overview
For the purpose of saving board space, digital switch is included in the TSSOP.In this case, it is packaged as Tape and Reel.This configuration includes 24 terminations as part of its basic functionality.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 24 component pins.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.Currently, it is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.It is provided that 5V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.5V.Device specifications require that the digital swith operate at a minimum supply voltage of 4V.In terms of logic ICs, it uses BUS DRIVER.
SN74CBT3384APWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3384APWRE4 Applications
There are a lot of Texas Instruments SN74CBT3384APWRE4 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- HDMI applications
- Small scale TV wall
- Data distribution
- Electronically controlled engine system
- Analog, digital or video signal switching
- Combinational circuit
- Injectors
- Automation system
- LVDS
