SN74CBT3384APWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 350 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3384APWRG4 Overview
Providing this information in the TSSOP enables digital switch board space to be saved.The basic configuration includes 24 terminations.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, conductors end at GULL WING.As a type of supply, Single is employed.Currently, it is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer contains 10 bits.Normally, 5V is powered by a battery.This is a signal switch that is categorized as Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.As far as the resistance is concerned, it operates with 2.It operates with a resistance of 7Ohm.The signal switch can operate at a maximum temperature of 85°C.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.The device is specified to operate at a maximum supply voltage of 5.5V in accordance with the applicable device specification.Typical device specifications specify a voltage supply of 4V for the digital swith.It employs BUS DRIVER as its logic IC.
SN74CBT3384APWRG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3384APWRG4 Applications
There are a lot of Texas Instruments SN74CBT3384APWRG4 Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Data bus control
- Telephone network
- Audio transmission
- Data transfer
- Arithmetic Logic Units
- Decimal decoder
- Control unit of Central Processing unit (CPU)
- Solenoid cooling fan
- To select different devices in microprocessor input
