Parameters |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
24 |
Weight |
129.500622mg |
Packaging |
Tape & Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
24 |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Current - Output |
64mA |
Number of Bits |
10 |
Propagation Delay |
150 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
5 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
2 |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Radiation Hardening |
No |
SN74CBT3384CDBQRG4 Overview
In order to conserve board space, digital switch is included in the SSOP.In this case, it is packaged as Tape & Reel.This configuration includes 24 terminations as part of its basic functionality.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 24 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.A total of 24 pins are configured on this board.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides 10 bits.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The resistance of the signal switching is 2.A resistance of 12Ohm is used to operate it.The maximum operating temperature of 85°C is acceptable for this signal switch.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.5V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4V.IC BUS DRIVER is used for the logic of this chip.
SN74CBT3384CDBQRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3384CDBQRG4 Applications
There are a lot of Texas Instruments SN74CBT3384CDBQRG4 Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Memory chips
- Data-routing applications
- Automatic health monitoring systems
- Analog to digital conversion
- Seven segment displays
- Time division multiplexing system
- Night vision cameras
- Electronically controlled engine system
- Logic circuits