SN74CBT3384CDW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT3384 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.365mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3384CDW Overview
Digital switch is provided in the 24-SOIC (0.295, 7.50mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.This configuration includes 24 terminations as part of its basic functionality.Its logic switch base part number is 74CBT3384 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 24 component pins.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.Currently, it is configured with 24 pins.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits provided.Vsup should be kept at 4V to prevent some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.In terms of resistance, it has a value of 12Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT3384CDW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3384CDW Applications
There are a lot of Texas Instruments SN74CBT3384CDW Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Small scale TV wall
- Combinational circuit
- Robotic vehicles
- Code conversion
- Enabling block of memory depending on address in memory chips
- Enabling different rows of memory depending on address in memory chips
- D/A converters
- To select different task for memory in microprocessor memory systems
- Control unit of Central Processing unit (CPU)
