SN74CBT3384CDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.006mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT3384CDWR Overview
Providing this information in the 24-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Since they are members of the 74CBT series, they can be used in a wide variety of applications.As parts of its basic configuration, 24 terminations are desgined.In addition, it also has a base part number of 74CBT3384, which can be used to find related parts.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 24 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.A configuration of 24 pins is used.The mount is in Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 10 bits.Vsup should be kept at 4V to prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.According to TR, the switches is packaged.2 is the resistance at which it operates.In terms of resistance, it has a value of 12Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT3384CDWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3384CDWR Applications
There are a lot of Texas Instruments SN74CBT3384CDWR Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Speed control of medern motors
- Injectors
- Data distribution
- Used to connect a single source to multiple destinations
- High-performance memory-decoding applications
- Encrypted communications system
- Memory chips
- Microprocessor instruction decoding
- CNC machines
