SN74CBT3384CPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Tape & Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 150 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3384CPWRG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.It is packaged in the way of Tape & Reel.Among its basic configurations are 24 terminations.For multiplexer's system, 5V voltage is supplied.This turn signal switch has 24 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.Currently, it is configured with 24 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits that are provided.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.A resistance of 12Ohm is used to operate it.At 85°C, the maximum operating temperature of this signal switch is acceptable.Temperatures of the multiplexer should be kept at -40°C.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.Device specifications require that the minimum supply voltage is 4V.IC BUS DRIVER is used for the logic of this chip.
SN74CBT3384CPWRG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBT3384CPWRG4 Applications
There are a lot of Texas Instruments SN74CBT3384CPWRG4 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Recording transmission
- To select different devices in microprocessor input
- Electronics industry
- Automation system
- Analog, digital or video signal switching
- Data collection system
- Memory chips
- Control unit of Central Processing unit (CPU)
- Data-routing applications
