Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
60.894776mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBT3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
8.1 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBT3861DGVRE4 Overview
For the purpose of saving board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers in the 74CBT series are suitable for a wide range of applications.The basic configuration includes 24 terminations.To find signal switch's related components, a base part number of 74CBT3861 may also be used.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 24 component pins.As the end of conductors, it uses GULL WING.This supply type employs Single.A configuration of 24 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In the signal multiplexer, there are 10 bits available.Keeping Vsup at 4V will prevent some unwanted failures.It is provided that 5V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A resistance of 2 governs its operation.A resistance of 7Ohm is used to operate it.64mA provides a high degree of switches' flexibility.
SN74CBT3861DGVRE4 Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3861DGVRE4 Applications
There are a lot of Texas Instruments SN74CBT3861DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Make half adder
- D/A converters
- VGA
- Video transmission
- Memory chips
- Time division multiplexing system
- Memory system of computers
- Logic gates for other digital devices
- CPU memory location identification