Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
60.894776mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBT3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
8.1 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBT3861DGVRG4 Overview
It is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) represents its packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Several applications are possible for 74CBT series multiplexers.There is a design for terminating 24 as part of its basic configuration.Its logic switch base part number is 74CBT3861 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 24 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.Currently, it is configured with 24 pins.The mounting is in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.It consumes 3μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The system operates with a resistance of 2.The system operates with a resistance of 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT3861DGVRG4 Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3861DGVRG4 Applications
There are a lot of Texas Instruments SN74CBT3861DGVRG4 Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- LVDS
- Enabling different functions units in microprocessor instruction decoding
- Memory chips
- Electronics industry
- VGA
- To select different devices in microprocessor output
- Encrypted communications system
- Image transmission
- Transmission from the computer system of a satellite