SN74CBT3861DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 8.1 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 8.1 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBT3861DWE4 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.In this case, it is packaged as Rail/Tube.Its basic configuration includes terminations in the 24 range.The multiplexer's system is powered by 5V voltage.This turn signal switch has a total of 24 component pins.A conductor terminates at GULL WING.Single is used as its supply type.A configuration of 24 pins is used.The mounting is in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer provides 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 7Ohm.There is no problem with operating this signal switch at the maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.5V.According to its specifications, the digital swith requires a minimum supply voltage of 4V.Additionally, TTL COMPATIBLE BUS SWITCH provides improved characteristics.It uses the logic IC BUS DRIVER as its core logic unit.
SN74CBT3861DWE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
SN74CBT3861DWE4 Applications
There are a lot of Texas Instruments SN74CBT3861DWE4 Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- CPU memory location identification
- Enabling block of memory depending on address in memory chips
- HDMI applications
- Idle motor
- Speed synchronization of multiple motors in industries
- Computer memory
- War field flying robot with a night vision flying camera
- Medical industry
- CNC machines
