Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBT3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
8.1 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.05mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT3861PWR Overview
For the purpose of saving board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Cut Tape (CT).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.Its basic configuration includes terminations in the 24 range.The base part number is 74CBT3861, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has a total of 24 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.A total of 24 pins are configured on this board.The mounting point is Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.The multiplexer ic provides 10 bits.Keeping Vsup at 4V will prevent some unwanted failures.In order for 5V to operate normally, a power supply is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.The resistance is 2.It operates with a resistance of 7Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBT3861PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT3861PWR Applications
There are a lot of Texas Instruments SN74CBT3861PWR Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- VGA
- LVDS
- Small scale TV wall
- High-performance memory systems
- Control unit of Central Processing unit (CPU)
- D/A converters
- Paper plants
- Make half adder
- High-performance memory-decoding applications