SN74CBT6800ADBQR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT6800ADBQR Overview
In order to conserve board space, digital switch is included in the 24-SSOP (0.154, 3.90mm Width).The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.Multiplexers of the 74CBT series can be used in a wide range of applications.The basic configuration includes 24 terminations.The base part number is 74CBT6800, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.There are 24 component pins in this turn signal switch.As a result, conductors end at GULL WING.There is a type of supply of Single.Currently, it is configured with 24 pins.The mount is in Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 10 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).There is a power supply provided for the mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 50μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 is the resistance at which it operates.The system operates with a resistance of 7Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT6800ADBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800ADBQR Applications
There are a lot of Texas Instruments SN74CBT6800ADBQR Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Encrypted communications system
- Used to connect a single source to multiple destinations
- Microprocessor instruction decoding
- Automatic Monitoring systems
- Decimal decoder
- Image transmission
- Frequency multiplexing system
- Logic circuits
- Memory system of computers
