SN74CBT6800ADBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800ADBR Overview
In order to conserve board space, digital switch is included in the 24-SSOP (0.209, 5.30mm Width).The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CBT series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBT6800.The multiplexer's system is powered by 5V voltage.There are 24 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.A total of 24 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.There are 10 bits signal multiplexer provides.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.mux switch's normal operation requires the power supply of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 50μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.With a resistance of 7Ohm, it operates.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT6800ADBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800ADBR Applications
There are a lot of Texas Instruments SN74CBT6800ADBR Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Electronically controlled engine system
- Home automation system
- A/D converters
- RF-based home automation system
- Signal router
- Memory system of computers
- Microprocessor instruction decoding
- Enabling different rows of memory depending on address in memory chips
- Audio transmission
