SN74CBT6800ADGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800ADGVR Overview
Providing this information in the 24-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.In this case, it is packaged as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.This configuration includes 24 terminations as part of its basic functionality.The base part number is 74CBT6800, which is also useful when looking up signal switch's related components.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 24 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 24 pins.As you can see, it is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer consists of 10 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.Normally, 5V is powered by a battery.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This signal switching operates at a resistance of 2.A resistance of 7Ohm is used to operate the signal switching.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT6800ADGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800ADGVR Applications
There are a lot of Texas Instruments SN74CBT6800ADGVR Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Transmission from the computer system of a satellite
- High-performance memory systems
- Idle motor
- Telephone network
- Injectors
- VGA
- Electronically controlled engine system
- Image transmission
- Analog, digital or video signal switching
