SN74CBT6800ADW
| Parameters | |
|---|---|
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
SN74CBT6800ADW Overview
For the purpose of saving board space, digital switch is included in the 24-SOIC (0.295, 7.50mm Width).The package is packaged in accordance with Tube.For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers from 74CBT series can be used for a wide range of applications.Among its basic features are 24 terminations.The part number for 74CBT6800 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch consists of 24 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 24 pins.The mounting point is Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer contains 10 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without any external influences, it consumes 50μA current of multiplexer ic at all times.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.The system operates with a resistance of 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBT6800ADW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800ADW Applications
There are a lot of Texas Instruments SN74CBT6800ADW Signal Switches / Multiplexers / Decoders applications.
- PCIe
- VGA
- Make full adder
- Combinational circuit
- Medium scale TV wall
- To select different task for memory in microprocessor memory systems
- Arithmetic Logic Units
- Logic circuits
- A robotic vehicle with the metal detector
- Telephone network
