SN74CBT6800ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800ADWR Overview
Due to the fact that it is provided in the 24-SOIC (0.295, 7.50mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.These multiplexers are members of the 74CBT series, which provide extensive application potential.This configuration includes 24 terminations as part of its basic functionality.The part number for 74CBT6800 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 24 component pins.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.It is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.Vsup should be kept at 4V to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 50μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.According to TR, the switches is packaged.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT6800ADWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800ADWR Applications
There are a lot of Texas Instruments SN74CBT6800ADWR Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Speed control of medern motors
- Video transmission
- Implementing boolean functions with multiple variables
- Electronically controlled engine system
- Make half adder
- High-performance memory systems
- Combinational circuit
- Data transfer
- Robotic vehicles
