SN74CBT6800APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 50μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 6 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Prop. Delay@Nom-Sup | 0.25 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800APWR Overview
Due to the lack of space on the board, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.There is a base part number of 74CBT6800 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.This turn signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.This multiplexer ic has 24 pins configured.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.There are 10 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 50μA current of multiplexer ic without external influences.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 7Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBT6800APWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800APWR Applications
There are a lot of Texas Instruments SN74CBT6800APWR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Robotic vehicles
- Control unit of Central Processing unit (CPU)
- A/D converters
- Electronically controlled engine system
- Injectors
- Encrypted communications system
- Memory chips
- Transmission from the computer system of a satellite
- Speed synchronization of multiple motors in industries
