Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.154, 3.90mm Width) |
Number of Pins |
24 |
Weight |
129.500622mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
10 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74CBT6800 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
240 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
64mA |
Low Level Output Current |
15mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBT6800CDBQR Overview
Providing this information in the 24-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74CBT series can be used in a wide range of applications.The basic configuration includes 24 terminations.The part number for 74CBT6800 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 24 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.There are 24 pins on it.Surface Mount is the way it is mounted.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 10 bits provided.Keeping Vsup at 4V will prevent some unwanted failures.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 12Ohm.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT6800CDBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800CDBQR Applications
There are a lot of Texas Instruments SN74CBT6800CDBQR Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Image transmission
- Decimal decoder
- Speed synchronization of multiple motors in industries
- Microprocessor input/output systems
- To select different task for memory in microprocessor memory systems
- Automation system
- RF-based home automation system
- LVDS
- Logic gates for other digital devices