Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
60.894776mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
10 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBT6800 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
6.2 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6.2 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Nominal Input Voltage |
2V |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBT6800CDGVR Overview
In order to conserve board space, digital switch is included in the 24-TFSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.There are 24 terminations included in its basic configuration.There is a base part number 74CBT6800 that can be used to locate signal switch's related components as well.In multiplexer's system, 5V is the voltage supplied.A component pin count of 24 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.This multiplexer ic has 24 pins configured.The mounting is in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 10 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).During mux switch's normal operation, 5V is provided with a power supply.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.With a resistance of 0, it operates.As far as the resistance is concerned, it operates with 12Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBT6800CDGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800CDGVR Applications
There are a lot of Texas Instruments SN74CBT6800CDGVR Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Medical industry
- Encrypted communications system
- Time division multiplexing system
- A robotic vehicle with the metal detector
- CPU memory location identification
- Telephone network
- Microprocessor instruction decoding
- Data transfer
- To select different task for memory in microprocessor memory systems